A useful system when developing and evaluating a radio equipment with wireless LAN will be introduced in this application note.

Application

Recently, some wireless LAN equipment are shifting to high-throughput MIMO from SISO in order to correspond to the increasing traffic. In addition, RFIC for wireless LAN is built into various electronic devices besides information communication terminal, and the trend is getting stronger.

A useful system when developing and evaluating a radio equipment with wireless LAN will be introduced in this application note.

Solution

1.Cable connection diagram

Figure:Cable connection diagram

By connecting DUT with RFIC for wireless LAN to an access point using coaxial cables, and in the shielded environment, it is possible to test without being affected by external radio waves. By attenuating power of each system independent using attenuators, it provides the environment for evaluating the receiving sensitivity and the error vector magnitude (EVM).

2.Wireless connection diagram

Figure:Wireless connection diagram

If the coaxial connection is not possible, it is possible to test without being affected by external radio waves in an environment shielded by coupling a communication terminal to an access point through antenna.

System configuration

1.Cable connection diagram

Electromagnetic anechoic box
MY1510
MY1515
MY1520
Programmable attenuator
MAT800/D

2.Wireless connection diagram

Electromagnetic anechoic box
MY1520
MY1530

Products introduction

Please feel free to contact us.

If you want to verify 5G, customize a radio wave shield box, or need product repair, please do not hesitate to contact us about any small matter.