The comparison data of the shielding characteristics of MY1510 and another overseas anechoic box is shown below.

Outline

The interface such as AC power supply, LAN and USB terminal for connecting EUT equipment is essential for anechoic box. When selecting an anechoic box, one of specifications is a shielding effectiveness. And when comparing this shielding effectiveness, it is an important point that it includes an interface. In fact, it is not an overstatement to say that the shielding effectiveness of an interface part determines the shielding performance of whole of an anechoic box.

The shielding characteristics of MY1510 (+IFM-1) and a product of another overseas company ("A"company) are compared in this application note. Our anechoic box provides the stable shield performance although including the interface.

Data

  • MY1510 is equipped with IFM-1 (AC(1),LAN (1),USB (1),D-sub 9pin (1)) at back side.
  • The product of "A"company is equipped with an interface installing LAN (1), USB (1) and D-sub 9pin (1) at back side.
  • As for a product of "A"company, the reduction of shielding effectiveness is observed at back side where an interface is installed.
  • The measuring method is in accordance with the inspecting standard of Micronix.
(The difference of electric field strength between in the open space and in the anechoic box using the same two antennas is defined as the shielding effectiveness.)
  • MY1510Specifications
    Outside dimensions 380(W) x 380(D) x 165(H)mm
    Inside dimensions 315(W) x 315(D) x 100(H)mm
    Weight approx. 3.5kg(excluding I/F module)
    Shielding effectiveness 60dB以上@2.4GHz
    Reflection loss more than 20dB(MYA-75:≧2.4GHz)
  • Catalog specifications of "A"company
    Outside dimensions 229(W) x 305(D) x 158(H)mm
    Inside dimensions 203(W) x 279(D) x 132(H)mm
    Weight approx. 4.5kg(excluding I/F module)
    Shielding effectiveness 100dB@1GHz
    90dB@3GHz
    80dB@6GHz
  • Graph:Shielding effectiveness comparison (2.4GHz)
  • Graph:Shielding effectiveness comparison(5.2GHz)

System configuration

Electromagnetic anechoic box [MY1510] x 1
Interface module [IFM-1]
[AC power supply(1)+D-sub 9pins(1)+LAN(1)+USB(1)]
x 1

Products introduction

Please feel free to contact us.

If you want to verify 5G, customize a radio wave shield box, or need product repair, please do not hesitate to contact us about any small matter.