Pre-compliance EMI test system MR2300

Ideal for "Pre-compliance" preliminary conformance test of EMI official test.
Total test system including not only antenna, spectrum analyzer for EMI, LISN and PC software for EMI but also anechoic box.

Pre-compliance EMI+EMS test system MR2400

This system combining the EMI test system MR 2300 and the EMS test system MR 2350. It is possible to conduct EMC (EMI + EMS) test.

Handheld Signal Analyzer MSA538E

This is a model in which EMI measurement function is added to MSA538.
Measurement frequency : 20kHz to 3.3GHz

Handheld Signal Analyzer MSA558E

This is a model in which EMI measurement function is added to MSA558.
Measurement frequency : 20kHz to 8.5GHz

Handheld Spectrum Analyzer MSA438E

This is a model in which EMI measurement function is added to MSA438.
Measurement frequency : 50kHz to 3.3GHz

Low Noise Amplifier MAP301/302

Optimum for emission noise measurement.

Magnetic Field Probe MMP500

Conducted disturbance noise measurement up to 9kHz low frequency.
This conducted disturbance noise can be easily measured with MMP500 and signal analyzer MSA538E/MSA558E.

Loop Antenna MAN120

A small Loop Antenna with a diameter of 40 cm suitable for low frequency measurement.
Antenna suitable for detection of low frequency signal and noise.

Biconical Antenna MAN150/MAN150B

Suitable for simplified measurement of radiated emissions.

Pre-compliance EMS test system MR2350

Pre-compliance EMS test system for the radiation immunity test (IEC / EN 61000-4-3).
Electric field strength of 1, 3, 10V/m. The malfunction of the EU by the electromagnetic radiation can be observed by a camera put in the anechoic box.

Pre-compliance EMI+EMS test system MR2400

This system combining the EMI test system MR 2300 and the EMS test system MR 2350. It is possible to conduct EMC (EMI + EMS) test.

Biconical Antenna MAN150/MAN150B

Suitable for simplified measurement of radiated emissions.

Power Amplifier MAP202

Power amplifier MAP202 Gain approx.45dB, Frequency range 80 to 1000MHz. 20W Power amplifier.

RF SIGNAL GENERATOR MSG703

IQ vector generation function, Sufficient modulation and sweep functions.

Conducted EMI Test System MR2150

Pre-compliance test system for conducted EMI.
The development cost can be significantly reduced by debugging and evaluating EUT using this system before testing in the formal EMC site.

Pre-compliance EMI test system MR2300

Ideal for "Pre-compliance" preliminary conformance test of EMI official test.
Total test system including not only antenna, spectrum analyzer for EMI, LISN and PC software for EMI but also anechoic box.

Pre-compliance EMI+EMS test system MR2400

This system combining the EMI test system MR 2300 and the EMS test system MR 2350. It is possible to conduct EMC (EMI + EMS) test.

Handheld Signal Analyzer MSA538E

This is a model in which EMI measurement function is added to MSA538.
Measurement frequency : 20kHz to 3.3GHz

Handheld Signal Analyzer MSA558E

This is a model in which EMI measurement function is added to MSA558.
Measurement frequency : 20kHz to 8.5GHz

Handheld Spectrum Analyzer MSA438E

This is a model in which EMI measurement function is added to MSA438.
Measurement frequency : 50kHz to 3.3GHz

Line Impedance Stabilization Network(LISN) MPW201B

A test environment can be easily constructed in a limited space.
LISN is necessary to perform stably and reproducible disturbance noise measurement.
The impedance of the power source observed from EUT side is made constant by inserting LISN in the power supply line.

Magnetic Field Probe MMP500

Conducted disturbance noise measurement up to 9kHz low frequency.
This conducted disturbance noise can be easily measured with MMP500 and signal analyzer MSA538E/MSA558E.

Handheld Signal Analyzer MSA538E

This is a model in which EMI measurement function is added to MSA538.
Measurement frequency : 20kHz to 3.3GHz

Handheld Signal Analyzer MSA558E

This is a model in which EMI measurement function is added to MSA558.
Measurement frequency : 20kHz to 8.5GHz

Handheld Spectrum Analyzer MSA438E

This is a model in which EMI measurement function is added to MSA438.
Measurement frequency : 50kHz to 3.3GHz

Low Noise Amplifier MAP301/302

Optimum for emission noise measurement.

Magnetic Field Probe MMP500

Conducted disturbance noise measurement up to 9kHz low frequency.
This conducted disturbance noise can be easily measured with MMP500 and signal analyzer MSA538E/MSA558E.

Loop Antenna MAN120

A small Loop Antenna with a diameter of 40 cm suitable for low frequency measurement.
Antenna suitable for detection of low frequency signal and noise.

Biconical Antenna MAN150/MAN150B

Suitable for simplified measurement of radiated emissions.

Please feel free to contact us.

If you want to verify 5G, customize a radio wave shield box, or need product repair, please do not hesitate to contact us about any small matter.