We have options of anechoic boxes which are I / F module, radio wave absorber, turntable, antenna, wooden table etc.
I/F Module
Electromagnetic Anechoic Box /Shield Box Taurus Series I/F Module
The I/F module is a module on which AC supply, DC supply, LAN, USB, SMA, BNC, N, D-sub or through pipe connectors are mounted. The I/F modules can be selected according to the intended use.
- Category
- Shield Box and Shield box option
Radio wave absorber
Radio wave absorber Ferrite -1
Frequency range : 50MHz to 800MHz
- Category
- Shield Box and Shield box option
Radio wave absorber Ferrite -2
Reflection Loss:more than 20dB35MHz to 2.2GHz
- Category
- Shield Box and Shield box option
Radio wave absorber Ferrite -3
Reflection Loss:more than 20dB＠30MHz to 400MHz, more than 12dB＠400MHz to 1GHz
- Category
- Shield Box and Shield box option
Radio wave absorber Urethane
The radio wave absorber of the urethane foam, which has similar characteristics with all of linear, elliptic and circular polarizations, is used in Taurus Series.
- Category
- Shield Box and Shield box option
Table
Electric Turn table MT107
Can be used to evaluate antenna radiation patterns, beamforming, beam tracking, etc.
It is small size and low height it can be incorporated into our electromagnetic anechoic box.
- Category
- Shield Box and Shield box option
Wooden table MT104/105
Wooden table for MY1520/MY1530.
It has casters, so it's easy to move around.
- Category
- Shield Box and Shield box option
Antenna
High-Speed Programmable Attenuator MAT800 Series
Multi-function programmable attenuator which can switch the attenuation by ultra high-speed (2μs). Maximum attenuation 80dB.
High-Speed Programmable Attenuator MAT810
There are no chattering and spike at switching moment because of differing from traditional mechanical attenuator. The precise simulation of wireless communication is capable by setting the attenuation step small. The frequency band is divided into sixteen and the calibration is done at each frequency so that the frequency characteristics of attenuation is made flat.
Step Attenuator MAT850
Covers the wideband (300MHz to 6.1GHz) in spite of small size, lightweight and low cost.
Putting upward or on transverse is available.
The attenuation value is easy to see bacause of the large seven segments LED.
The three knobs are independent in every 10dB, 1dB and 0.1dB.
And neither chattering nor spike are generated when switching the knobs.
Handover Tester MH3800
For improving the efficiency of verification man-hours by quantifying the test environment, long-run (aging) tests, and automating tests.
Please feel free to contact us.
If you want to verify 5G, customize a radio wave shield box, or need product repair, please do not hesitate to contact us about any small matter.