Handheld Signal Analyzer MSA538TG
Built-in TG from 5MHz to 3.3GHz
Measurement frequency : 20kHz to 3.3GHz
Handheld Signal Analyzer MSA538E
This is a model in which EMI measurement function is added to MSA538.
Measurement frequency : 20kHz to 3.3GHz
Handheld Signal Analyzer MSA558E
This is a model in which EMI measurement function is added to MSA558.
Measurement frequency : 20kHz to 8.5GHz
DSRC Communication Unit ME9115
Making it possible to read WCN of OBE and to measure electric field strength of OBE and RSU.
[Discontinued]DSRC OBE Tester ME9100
ME9100 is DSRC OBE tester to check the wireless communication of OBE installed on the car.
ETC / ITS Spot Electric Field Strength Measurement System ME9200
ME9200 makes possible to measure the electric field strength of the signal radiated from ETC or ITS spot in a short time. With this system, after measuring the electric field strength distribution of the ETC/ITS spot with operation wave or CW in a short time, the electric field strength graph and the map diagram are created.
Step Attenuator MAT850
Covers the wideband (300MHz to 6.1GHz) in spite of small size, lightweight and low cost.
Putting upward or on transverse is available.
The attenuation value is easy to see bacause of the large seven segments LED.
The three knobs are independent in every 10dB, 1dB and 0.1dB.
And neither chattering nor spike are generated when switching the knobs.
High-Speed Programmable Attenuator MAT810
There are no chattering and spike at switching moment because of differing from traditional mechanical attenuator. The precise simulation of wireless communication is capable by setting the attenuation step small. The frequency band is divided into sixteen and the calibration is done at each frequency so that the frequency characteristics of attenuation is made flat.
DTF Adapter MA430
The distance to discontinuity point of a cable and the length of a normal cable can be measured.