Conducted EMI Test System MR2150

Pre-compliance test system for conducted EMI.
The development cost can be significantly reduced by debugging and evaluating EUT using this system before testing in the formal EMC site.

Pre-compliance EMI test system MR2300

Ideal for "Pre-compliance" preliminary conformance test of EMI official test.
Total test system including not only antenna, spectrum analyzer for EMI, LISN and PC software for EMI but also anechoic box.

Pre-compliance EMI+EMS test system MR2400

This system combining the EMI test system MR 2300 and the EMS test system MR 2350. It is possible to conduct EMC (EMI + EMS) test.

Handheld Signal Analyzer MSA538E

This is a model in which EMI measurement function is added to MSA538.
Measurement frequency : 20kHz to 3.3GHz

Handheld Signal Analyzer MSA558E

This is a model in which EMI measurement function is added to MSA558.
Measurement frequency : 20kHz to 8.5GHz

Handheld Spectrum Analyzer MSA438E

This is a model in which EMI measurement function is added to MSA438.
Measurement frequency : 50kHz to 3.3GHz

Line Impedance Stabilization Network(LISN) MPW201B

A test environment can be easily constructed in a limited space.
LISN is necessary to perform stably and reproducible disturbance noise measurement.
The impedance of the power source observed from EUT side is made constant by inserting LISN in the power supply line.

Magnetic Field Probe MMP500

Conducted disturbance noise measurement up to 9kHz low frequency.
This conducted disturbance noise can be easily measured with MMP500 and signal analyzer MSA538E/MSA558E.

Please feel free to contact us.

If you want to verify 5G, customize a radio wave shield box, or need product repair, please do not hesitate to contact us about any small matter.