RF SIGNAL GENERATOR MSG703

IQ vector generation function, Sufficient modulation and sweep functions.

Features

IQ modulation signal output

64QAM output

The IQ modulated signal is output by inputting such IQ signal as analog, digital or list data(USB memory and manual) in IQ modulator (option) from the outside.

Fast switching

The fast switching of 0.5μs at frequency (however, 1.5ms at 10N-3(MHz)(N: integer) point) and 200μs at level is possible. For command and external trigger receiving, both are 1.5ms (however, 3ms at frequency 10N-3(MHz)(N: integer) point).

ALC function

MSG703 ensures the high accurate RF output level by ALC circuit (Auto Level Control circuit).

High accurate frequency and level output

The frequency can be set at maximum 11 digits in 0.1Hz resolution. The accuracy of level is ± 0.6dB (excluding 625 to 725MHz) in “ALC on”.

Frequency and level setting by three ways

Since frequency and level can be set by using ten key, rotary encoder and arrow key, the operability will increase dramatically.

Abundant modulation functions

Spectrum waveform of FSK(PN15)

FSK and PSK of digital modulation, and AM of analog modulation are provided as standard. FSK and PSK have the register mode with fast transmission rate and the direct mode with generation of arbitrary modulation.
In addition, the burst control is available.

They can be used simultaneously with the sweep function. Frequency hopping is possible.

Sufficient sweep functions

Sweep waveform

MSG703 has the list sweep by arbitrary lists of frequency and level, and the step sweep at which frequency/level from the start until the stop is swept by specified step. Moreover, it is possible to control the sweep by the trigger signal, and there are four trigger modes of edge 1, edge 2, level 1 and level 2.

Phase offset function

The phase of the output signals of two MSG703 can be synchronized.

Small size and lightweight

Since MSG703 is portable size as 360 (W) × 160 (H) × 360 (D) mm and is lightweight as 8.5kg, it can be used easily anywhere and anytime.

Sufficient interfaces

USB host, USB device and LAN (1000BASE-T) are equipped as standard.

Large and color LCD display

The easy-to-read screen by 640 × 480 dots, 5.7 inches and color LCD.

Displaying sweep waveform and modulation waveform on the screen

PSK modulation waveform

Waveform of frequency or level sweep, and modulation waveform of FSK, PSK or AM are displayed on the screen.

Specification

Frequency range5MHz to 3GHz
SSB phase noise<-95dBc/Hz @ 1 to 3GHz, 20kHz offset
<-100dBc/Hz @ 5M to 1GHz, 20kHz offset
Maximum output level<at ALC on>
+14dBm @ 5MHz to <1.025GHz
+13dBm @ 1.025 to <2.025GHz
+11dBm @ 2.025 to <2.825GHz
+10dBm @ 2.825 to 3GHz
Kinds of sweepList sweep, Step sweep
Kinds of modulationFSK modulation, PSK modulation, Amplitude modulation(AM)
InterfaceUSB device, USB host, LAN(1000BASE-T)
Option
  • IQ modulator MIQ700
  • High stability timebase MSG700-03

Option

IQ modulator MIQ700

IQ modulator MIQ700
  • Q vector signal generator
  • IQ signals are three kinds of external analog, external digital and list data.
  • EVM of 1.3%

*Factory option

High stability timebase MSG700-03

  • Uses high stability OCXO (oven-controlled crystal oscillator) .
  • Excellent temperature stability and aging rate

* Factory option

Temperature stability<±10ppb @ 0 to 50°C
Aging rate<±1ppb/day
<±100ppb/year
<±1ppm/10years

Library

Products Catalog

RF SIGNAL GENERATOR MSG703
MICRONIX Products DIGEST catalog

Technical report

RF signal generator MSG703 ≪MSG703 as Vector signal generator≫

Any phase-modulated signal can be output. Overview Currently, the wireless communication is widely used even in consumer electronics products as well as in mobile phone and digital terrestrial TV. As […]

Please feel free to contact us.

If you want to verify 5G, customize a radio wave shield box, or need product repair, please do not hesitate to contact us about any small matter.