Lineup of options used in EMC test system such as Magnetic field probe and Antenna.
Software
EMI measurement PC software MAS430/530
This software is easy to use even if you are unfamiliar with spectrum analyzer operation and EMI standards.
Line Impedance Stabilization Network (LISN)
Line Impedance Stabilization Network(LISN) MPW201B
A test environment can be easily constructed in a limited space.
LISN is necessary to perform stably and reproducible disturbance noise measurement.
The impedance of the power source observed from EUT side is made constant by inserting LISN in the power supply line.
Electric Turn table
Electric Turn table (Factory option) MT106
Electric turntable for for MY5310, 5310S, 5310SU, 5410
Magnetic Field Probe
Magnetic Field Probe MMP500
Conducted disturbance noise measurement up to 9kHz low frequency.
This conducted disturbance noise can be easily measured with MMP500 and signal analyzer MSA538E/MSA558E.
Antenna
Biconical Antenna MAN150/MAN150B
Suitable for simplified measurement of radiated emissions.
Loop Antenna MAN120
A small Loop Antenna with a diameter of 40 cm suitable for low frequency measurement.
Antenna suitable for detection of low frequency signal and noise.
Low noise amplifier
Low Noise Amplifier MAP301/302
Optimum for emission noise measurement.
Power amplifier
Power Amplifier MAP202
Power amplifier MAP202 Gain approx.45dB, Frequency range 80 to 1000MHz. 20W Power amplifier.
EUT camera monitor
EUT camera monitor MEC235
he malfunction of the EUT by the electromagnetic radiation can be observed by a camera put in the anechoic box. The image is displayed on the PC screen.
Please feel free to contact us.
If you want to verify 5G, customize a radio wave shield box, or need product repair, please do not hesitate to contact us about any small matter.