ETC / ITS Spot Electric Field Strength Measurement System ME9200C

This system measures the electric field strength distribution of ETC / ITS spots with operating waves or CW in a short time and create electric field strength graphs and map diagrams.This is an upgraded version of the conventional ME9200.※Only for Japanese domestic specifications.

System overview

When 9 antennas are attached to the cart type, the 3.2m wide lane can be measured twice.

Comparison with the conventional ME9200

Conventional type:ME9200
ME9200C

The integrated rear radio wave absorber reduces variations in electric field strength due to reflection.

Since the antenna unit can be directly attached to the antenna fixing bar, the measurement preparation man-hours are reduced.

ME9200 and ME9200C installation comparison.

System composition

System

 ETCITSVehicle-mountedCartAntenna
S11  9
S12 9

○ mark is included in the system

Standard specifications

Antenna

The standard is 9 pieces, and 3.2m wide lanes can be measured twice.≪Antenna spacing 20 cm≫.

  • External dimensions:195(W)×105(D)×300(H)mm(excluding protrusions)

Cart

Equipped with a speed sensor, the measured distance is calculated automatically.
With 9 antennas installed, 3.2m wide lanes can be measured twice.

  • External dimensions:700(W)×1000(D)×350(H)mm(when folded)
  • External dimensions:700(W)×1000(D)×900(H)mm(when assembled)

Control Unit

It has a start SW and a SW that adjusts the zero point at the roadside machine position.
Requires DC12V or AC100V power supply. An AC/DC converter is included as standard.

  • External dimensions:430(W)×450(D)×101(H)mm(excluding protrusions)

PC Software

It controls the control unit and immediately displays the measured electric field strength value in a graph or map diagram.

Electric field strength measurement example

The ME9200 software running on a PC controls the control unit to perform measurements, and automatically collects, analyzes, and displays data.

Option

Product nameDescription
Trunk for antenna unitA trunk for storing 9 antenna units and a switch box. Useful for storage and transportation.
Trunk for control unitA trunk for storing the control unit and cables. Useful for storage and transportation.
Laptop for controlIncludes software installation work for ME9200.
Two-wave simultaneous measurement functionIt is a function that measures the specified two frequencies at the same time in one run.

Library

Products Catalog

ETC/ITS spot electric field strength measurement system ME9200C
MICRONIX Products DIGEST catalog

Please feel free to contact us.

If you want to verify 5G, customize a radio wave shield box, or need product repair, please do not hesitate to contact us about any small matter.