{"id":2206,"date":"2011-04-01T00:00:53","date_gmt":"2011-03-31T15:00:53","guid":{"rendered":"https:\/\/micronix-jp.com\/?p=2206"},"modified":"2023-03-20T17:25:49","modified_gmt":"2023-03-20T08:25:49","slug":"dtf-takunai","status":"publish","type":"post","link":"https:\/\/micronix-jp.com\/english\/note\/application\/dtf-takunai.html","title":{"rendered":"Measurement of distance to fault of cable (DTF)"},"content":{"rendered":"

Example using DTF (Distance To Fault) measurement function of MSA438TG<\/p>\n\n\n

Application<\/h2>\n

Using MSA438TG equipped with DTF function firmware (DTF\/FW), the discontinuity point of a cable and the length of a normal cable can be measured. In addition, the measurement data can be viewed using dedicated software. <\/p>\n

The measurement range is 0.3 to 1000m at 50\u03a9 cable and 1 to 400m at 75\u03a9 cable. <\/p>\n

In this application note, the data which measured using simulated house wiring of CATV will be introduced. <\/p>\n\n\n\n

Solution<\/h2>\n

\"Fig.1:Measurement<\/p>\n

The measurement data shown in Fig.1 is actual data measured in the verification model of the simulated house wiring diagram of CATV shown in Fig.2. <\/p>\n

\"1.44m\" in Fig.1 corresponds to the distance between DTF (MA430) and Distributor 1 in Fig.2. Similarly, 2.89m (distributor 2), 3.96m (distributor 3) and 5.52m (distributor 4) show the reflection at the distributors. The level at 6.29m is low because terminal 2 is terminated. <\/p>\n\n

\"Fig.2:Simulated<\/p>\n

Almost all the conventional measuring instruments adopting TDR method can detect only the maximum reflecting point. Moreover, they have the weak points of bad distance accuracy and slow measurement response, but MSA438TG + DTF (MA430) is better accuracy and faster response comparing with them. <\/p>\n

Since our DTF function can measure from 1m to 400m with 75ohm cable, even cable length in house (10 to 100m) and of trunk line (200 to 400m) can be measured. <\/p>\n\n\n\n\n

System configuration<\/h2>\n\n\n\n\n\n\n\n\n<\/tfoot>\n<\/table>\n
\u2780 50\u03a9cable measurement set<\/th>\n<\/tr>\n
Spectrum analyzer\uff3bMSA438TG\uff3d<\/a><\/td>\n<\/tr>\n
DTF Adapter\uff3bMA430\uff3d<\/a><\/td>\n<\/tr>\n
Optional software (DTF\/FW)<\/td>\n<\/tr>\n
50\u03a9terminator (MG-50N)<\/a><\/td>\n<\/tr>\n<\/tbody>\n
\n\n\n\n\n\n\n\n<\/tfoot>\n<\/table>\n\n

*75\u03a9measurement kit:50\u03a9\/75\u03a9adapter, 75\u03a9terminator and cable<\/p>\n\n\n\n

Products introduction<\/h2>\n

\u2781 75\u03a9cable measurement set<\/th>\n<\/tr>\n
Spectrum analyzer\uff3bMSA438TG\uff3d<\/a><\/td>\n<\/tr>\n
DTF Adapter\uff3bMA430\uff3d<\/a><\/td>\n<\/tr>\n
Optional software (DTF\/FW)<\/td>\n<\/tr>\n
75\u03a9measurement kit (MK430)<\/td>\n<\/tr>\n<\/tbody>\n